Merge 41b0e86fda into 8eb0a17b78

docs: add dzgui7 onboarding page

DEVELOPERS.md

@@ -13,11 +13,6 @@ git submodule update --recursive --init
 sphinx-build -M html source build -a
 
 # Building standalone DZGUI release binaries
-1. Run `./scripts/dl_pyapp.sh`
-# TODO: secondary script that packs this archive
-2. Download cpython 3.13, linux, gnu, v3
-https://github.com/astral-sh/python-build-standalone/releases/download/20251014/cpython-3.13.9%2B20251014-x86_64_v3-unknown-linux-gnu-install_only_stripped.tar.gz
-3. Explicitly install dependencies into site-packages
-4. Pack back into a tarball
-5. Run `python3 scripts/release.py`
-6. Generate a release and tag against the bundled `dzgui` executable
+1. Set up the build target: `rustup target add x86_64-unknown-linux-musl`
+2. Run `python3 scripts/release.py`
+3. Generate a release and tag against the bundled `dzgui` executable

docs/source/conf.py

@@ -36,5 +36,5 @@ html_show_copyright = False
 html_show_sourcelink = False
 
 today_fmt = "%Y-%m-%d"
-release = "7.x.x"
-version = "7.x.x"
+release = "6.x.x - 7.x.x"
+version = "6.x.x - 7.x.x"

docs/source/dzgui6.rst

@@ -0,0 +1,110 @@
+Installation (DZGUI 6 legacy)
+==================
+
+Basic runtime dependencies
+---------------------------------
+
+If not already installed, the below can be found in your system’s package manager.
+
+If any dependencies are missing when the application starts, it will warn you, so you need not take any preemptive measures here.
+
+- curl
+- jq
+- steam
+- wmctrl or xdotool
+- zenity
+
+.. note::
+    All dependencies are installed out of the box on Steam Deck.
+
+UI dependencies (Python and PyGObject)
+---------------------------------------
+.. important::
+    As of version 6.0.0, you must have a valid Python 3.13 and matching PyGObject environment.
+    Depending on your distribution, this may require additional manual intervention.
+
+Arch Linux (vanilla variants)
+^^^^^^^^^^^^^^^^^^^^^^
+You will need the ``python3.13`` package, if it is not already installed.
+
+Install the following build dependencies:
+
+.. code:: console
+
+   sudo pacman -S cmake gcc pkgconf python-cairo
+
+.. include:: venv.rst
+
+CachyOS (Arch)
+^^^^^^^^^^^^^^^^^^^^^^^
+Refer to the build instructions for Arch Linux first.
+The ``python3.13`` package is not available on CachyOS, so it is recommended to
+use ``uv`` to manage Python versions.
+
+.. code:: console
+
+   sudo pacman -S uv
+
+.. include:: venv.rst
+
+Manjaro 26 (Arch)
+^^^^^^^^^^^^^^^^^^^^^^^
+If Python 3.13 is not already available out of the box, refer to the build instructions for :ref:`Arch Linux (vanilla variants)`.
+
+Debian 13 variants
+^^^^^^^^^^^^^^^^^^^^^^^
+Python 3.13 and PyGObject are available out of the box. No additional steps are necessary.
+You can proceed to the :ref:`Installscript`.
+
+Fedora 43 variants
+^^^^^^^^^^^^^^^^^^^^^^^
+Fedora 43 ships with a newer version of Python (3.14), so you must set up Python 3.13 in its own
+virtual environment (venv) to prevent it from conflicting with the system package.
+
+Install the following build dependencies:
+
+.. code:: console
+
+    sudo dnf install cairo cairo-devel cairo-gobject-devel gcc python3.13 python3.13-devel
+
+.. include:: venv.rst
+
+Ubuntu 24 variants
+^^^^^^^^^^^^^^^^^^^^^^
+Ubuntu ships with an older version of Python (3.12). You must install additional dependencies.
+Add the PPA below to add Python 3.13 to your sources:
+
+.. code:: console
+
+    sudo add-apt-repository ppa:deadsnakes/ppa
+
+Install the following build dependencies:
+
+.. code:: console
+
+    sudo apt install python3.13 python3.13-venv python3.13-dev build-essential python3-gi-cairo pkg-config libgirepository-2.0-dev libcairo2-dev
+
+.. include:: venv.rst
+
+Installscript
+-----------------------
+
+Invoke the command below from a terminal. This script fetches the main DZGUI script from the repository,
+makes it executable, and launches DZGUI's first-time setup. After running this installscript, you will
+have the file ``dzgui.sh`` wherever you invoked the command.
+
+.. code:: console
+
+    curl -s "https://codeberg.org/aclist/dztui/raw/branch/dzgui/install.sh" | bash
+
+nixOS installation
+----------------------
+Two packages are independently maintained by other contributors. Each takes a slightly different approach.
+nixOS packages are standalone and do not require cloning the git repository.
+
+- https://github.com/lelgenio/dzgui-nix
+- https://github.com/jiriks74/dzgui.flake
+
+Next steps
+---------------
+Proceed to the :doc:`setup` section for setup instructions.

docs/source/dzgui7.rst

@@ -0,0 +1,33 @@
+Installation (DZGUI 7 beta)
+==================
+
+In order to make the first-time setup experience easier for end-users, DZGUI 7 no longer requires
+the tool to be installed from source code into a working Python environment. All necessary dependencies and the
+runtime environment are built-in.
+
+Turnkey installer
+------------------------
+
+- Visit the project's `Releases page <https://github.com/aclist/dztui/releases>`_.
+- Extract the DZGUI tarball from the top of the **Assets** list.
+- From a terminal, run the command ``./dzgui`` or double click on the extracted file in
+  a file explorer.
+- Once the setup wizard opens, follow the steps at the bottom of this page.
+
+UI dependencies (Python and PyGObject)
+---------------------------------------
+On most major distributions, GObject introspection libraries should be available by default.
+
+If you receive an error about a missing ``libgirepository-2.0`` dependency, install it via your system's package manager.
+
+On Debian-based distributions (Ubuntu, etc.), this package is not explicitly installed on the system.
+You can install it via the following set of commands:
+
+.. code:: console
+
+   sudo apt update
+   sudo apt install libgirepository-2.0
+
+Next steps
+---------------
+Proceed to the :doc:`setup` section for setup instructions.

docs/source/installation.rst

@@ -1,110 +1,28 @@
 Installation
 ==================
 
-Basic runtime dependencies
----------------------------------
+As of this writing, you have a choice of two DZGUI versions:
 
-If not already installed, the below can be found in your system’s package manager.
+- DZGUI 6: Legacy stable version, more complicated to install
+- DZGUI 7: Unstable beta version, much easier to install
 
-If any dependencies are missing when the application starts, it will warn you, so you need not take any preemptive measures here.
+DZGUI 6
+--------------------
+This version is no longer receiving feature updates, but will receive security updates until it is replaced by DZGUI 7.
 
-- curl
-- jq
-- steam
-- wmctrl or xdotool
-- zenity
+DZGUI 6 must be installed from the source code and has many more package dependencies and prerequisites for it to function correctly.
+If you are looking for a one-click, self-contained installer, use :ref:`DZGUI 7` instead.
 
-.. note::
-    All dependencies are installed out of the box on Steam Deck.
+To install **DZGUI 6**, visit :doc:`dzgui6`.
 
-UI dependencies (Python and PyGObject)
----------------------------------------
-.. important::
-    As of version 6.0.0, you must have a valid Python 3.13 and matching PyGObject environment.
-    Depending on your distribution, this may require additional manual intervention.
 
-Arch Linux (vanilla variants)
-^^^^^^^^^^^^^^^^^^^^^^
-You will need the ``python3.13`` package, if it is not already installed.
+DZGUI 7
+--------------------
+This version is currently in beta testing and has all of the features found in DZGUI 6, but may be unstable.
 
-Install the following build dependencies:
+DZGUI 7 has an all-in-one installer and setup wizard, and many new features not found in DZGUI 6.
+However, this codebase is newer and is provided as a pre-release beta candidate.
 
-.. code:: console
+If you want the simplest installer and don't mind experiencing the occasional bug, use this version.
 
-   sudo pacman -S cmake gcc pkgconf python-cairo
-
-.. include:: venv.rst
-
-CachyOS (Arch)
-^^^^^^^^^^^^^^^^^^^^^^^
-Refer to the build instructions for Arch Linux first.
-The ``python3.13`` package is not available on CachyOS, so it is recommended to
-use ``uv`` to manage Python versions.
-
-.. code:: console
-
-   sudo pacman -S uv
-
-.. include:: venv.rst
-
-Manjaro 26 (Arch)
-^^^^^^^^^^^^^^^^^^^^^^^
-If Python 3.13 is not already available out of the box, refer to the build instructions for :ref:`Arch Linux (vanilla variants)`.
-
-Debian 13 variants
-^^^^^^^^^^^^^^^^^^^^^^^
-Python 3.13 and PyGObject are available out of the box. No additional steps are necessary.
-You can proceed to the :ref:`Installscript`.
-
-Fedora 43 variants
-^^^^^^^^^^^^^^^^^^^^^^^
-Fedora 43 ships with a newer version of Python (3.14), so you must set up Python 3.13 in its own
-virtual environment (venv) to prevent it from conflicting with the system package.
-
-Install the following build dependencies:
-
-.. code:: console
-
-    sudo dnf install cairo cairo-devel cairo-gobject-devel gcc python3.13 python3.13-devel
-
-.. include:: venv.rst
-
-Ubuntu 24 variants
-^^^^^^^^^^^^^^^^^^^^^^
-Ubuntu ships with an older version of Python (3.12). You must install additional dependencies.
-Add the PPA below to add Python 3.13 to your sources:
-
-.. code:: console
-
-    sudo add-apt-repository ppa:deadsnakes/ppa
-
-Install the following build dependencies:
-
-.. code:: console
-
-    sudo apt install python3.13 python3.13-venv python3.13-dev build-essential python3-gi-cairo pkg-config libgirepository-2.0-dev libcairo2-dev
-
-.. include:: venv.rst
-
-Installscript
------------------------
-
-Invoke the command below from a terminal. This script fetches the main DZGUI script from the repository,
-makes it executable, and launches DZGUI's first-time setup. After running this installscript, you will
-have the file ``dzgui.sh`` wherever you invoked the command.
-
-.. code:: console
-
-    curl -s "https://codeberg.org/aclist/dztui/raw/branch/dzgui/install.sh" | bash
-
-nixOS installation
-----------------------
-Two packages are independently maintained by other contributors. Each takes a slightly different approach.
-nixOS packages are standalone and do not require cloning the git repository.
-
-- https://github.com/lelgenio/dzgui-nix
-- https://github.com/jiriks74/dzgui.flake
-
-Next steps
----------------
-Proceed to the next section for setup instructions.
+To install **DZGUI 7**, visit :doc:`dzgui7`.

scripts/release.py

@@ -4,10 +4,8 @@ import subprocess
 import tarfile
 
 from pathlib import Path
-
 from prebuild import get_pyapp, rebuild_cpython
 
-
 root = Path(__file__).resolve().parents[1]
 output = root.joinpath("dist")
 build_dir = root.joinpath("build")
@@ -17,6 +15,7 @@ wheel = builder.build("wheel", output_directory=output)
 stem = Path(wheel).stem
 tarname = f"{stem}.tar.gz"
 
+
 metadata = stem.split("-")
 appname = metadata[0]
 version = metadata[1]
@@ -44,9 +43,18 @@ env["PYAPP_FULL_ISOLATION"] = "true"
 env["PYAPP_DISTRIBUTION_PATH"] = str(cpython)
 env["PYAPP_DISTRIBUTION_PYTHON_PATH"] = "python/bin/python3"
 
-proc = subprocess.run(["cargo", "build", "--release"], env=env, cwd=pyapp_dir)
+target = "x86_64-unknown-linux-musl"
+build_params = [ "cargo", "build", "--release", "--target", target]
+
+proc = subprocess.run(
+    build_params,
+    env=env,
+    cwd=pyapp_dir,
+)
+
+# TODO: set proper release tags on tarfile
 if proc.returncode == 0:
-    output_exe = build_dir.joinpath("pyapp-latest/target/release/pyapp")
+    output_exe = build_dir.joinpath(f"pyapp-latest/target/{target}/release/pyapp")
     release_exe = output.joinpath(appname)
     output_exe.rename(release_exe)
     tarpath = output.joinpath(tarname)